The hand chain hoist must be operated in strict accordance with relevant requirements during the hoisting process, such as the inspection of the lifting capacity before operation, the chain flexibility test, etc. Before the hand chain hoist is lifted, please be sure to ask the operator to check and maintain good habits to avoid accidents.

Core Points:

The inspection before lifting the hand chain hoist can effectively avoid accidents. All operators must comply with relevant requirements to operate.

Requirements for chain hoist during lifting:

1: Inspection requirements before lifting

Before lifting, the chain hoist must strictly check all accessories, such as chains, bearings, bearing capacity, etc. There are also some cleaning and sanitation that must be done in place.

2: Do not overload

Each chain hoist has a load-bearing requirement, which cannot be exceeded during operation, otherwise it will cause the chain to break, and in serious cases, it will cause personal injury.

3: The chain must be kept smooth

During the lifting process, the chain should be kept vertical to suspend the objects, and the chain links should not be twisted;

4: Maintain the correct direction

When the hand chain hoist is hoisted, the zipper direction must be in the same plane as the hand chain wheel. It is strictly forbidden to pull the hand chain diagonally, otherwise the chain will be stuck.

5: Tension requirements

When hoisting the hand chain hoist, the force must be stable and cannot be large or small, otherwise there will be faults such as chain jumping or chain jamming. If the tension is too tight or it cannot be pulled, check the cause and do not pull hard to avoid breaking the chain or pin